Grinder pump alarm going off? Do this first
Red light on & a loud alarm on the box outside your house? Here's what to do.
- KCMO Master Plumber #014780
- MO Advanced OSWTS Installer #30617
- Insured
- Serving Kansas City since 2008
Quick answer
- Stop ALL water use in your home.
- Silence the alarm with the switch or button on the panel.
- Call 888-936-9377.
Silencing the alarm stops the noise. It doesn't fix anything.
Step 1: Stop all water use
The second the alarm goes off, stop ALL water use inside your home.
That's every drain:
- Laundry (& the dryer, if it uses steam)
- Dishwasher
- Baths & showers
- Sinks
- Toilets
Water you use now goes into a tank that's already full. It can back up into your home.
Step 2: Silence the alarm
Find the switch on the right side or the bottom of the control panel.
- Toggle on the right side: flip it from up (on) to the middle (silent).
- Button on the bottom: press it.
The horn stops. The red light stays on. Our tech resets it when we get there.
Switch missing or broken?
Open the panel. Inside are 2 breakers.
Turn off the small single-pole breaker. That's the alarm. It silences the alarm every time.
Never touch the bigger dual-pole breaker. That one runs your pump.
| Panel | Alarm breaker (turn off to silence) | Pump breaker (never touch) |
|---|---|---|
| E-One one-pump panels | 10 amp single-pole, 120 volt | 15 amp dual-pole, 240 volt |
| Delta & Liberty panels | 15 amp single-pole, 120 volt | 20 amp dual-pole, 240 volt |
Those are the sizes we see most. Yours can differ, so read the labels. Only open the panel if you're dry & not standing in water.
This is for grinder pump panels. Septic, ATU or drip panel? Don't open it. Call us. See septic & drip alarms.
Step 3: Call us
Call 888-936-9377.
Leave a message and we'll call you back the same day, 7 AM to 6:30 PM, Monday through Friday.
Tell us your name, address, phone number & what's going on.
After-hours rates apply.
Is sewage coming into your house?
That's the most urgent kind of call. Ask yourself, in this order:
- Is sewage backing up into your basement or home?
- Is sewage overflowing out of your tank or pooling in your yard?
- Sewage backing up but no alarm?
Any yes: stop all water & call 888-936-9377 now.
Sewage shows up first at the lowest drain in the house closest to the tank, like a basement floor drain, shower or toilet. Keep an eye on it.
What the alarm means
Your tank has a pump float & an alarm float. The alarm float sits up high.
When the water gets high enough to lift it, the red light comes on & the alarm sounds.
The number one cause: grease. Grease builds up inside the grinder pump & causes most alarms & service calls.
Power out?
Your pump can't run without power.
- Short outage: use water sparingly.
- Long outage: stop using water until the power comes back.
When it does, the pump starts on its own.
What not to do
- Don't open the tank or take off the lid. If your lid is damaged or off, call us to replace it.
- Don't try to fix or change any part of the pump system yourself, & don't have anyone else do it.
- Never touch the pump breaker (the bigger dual-pole one).
What a visit costs
Did we put your grinder pump in? Tell us when you call. For 3 years, a grinder pump failure costs you nothing: pump, service call & labor are covered, except hard items that bind the cutter blades. A float we install or replace gets 1 year. Grease can't hurt the pump, but service calls & labor for a grease-hung float aren't covered. Want 5 years with no exclusions on the pump? The 5-Year Pump Protection Package covers only the pump, never the floats, panel, hoses, tank or wiring. It is only available at time of installation.
Need it fixed? See grinder pump repair. Pump done for good? See grinder pump replacement.
Every brand
We work on E/One, Liberty, Delta, Zoeller, Myers, Barnes & the rest, plus their panels, floats & alarms.
Stop the next alarm
Once a year we test the pump, both floats, the alarm & light, the check valves & the panel, & clean out grease if it's built up. You get a written report.
Where we work
Based in Belton, MO. Both sides of the state line.
Belton & Loch Lloyd · Raymore · Lee's Summit · Lake Winnebago · Lake Lotawana · Lone Jack · Blue Springs · Kansas City · Parkville · Riverside · Olathe, KS
What it costs
No mystery math. These are our public rates:
- Service call
- $195
- Hourly troubleshooting labor
- $180/hr
Parts & bigger jobs are quoted on site, in writing, before we start. After-hours rates apply.
Need more than a silenced alarm?
Grinder pump repair
Repair, replacement, maintenance & annual inspections on every brand: E/One, Liberty, Zoeller, Myers, Barnes & more.
See the serviceGrinder pump installation
New Franklin Electric grinder pump systems for homes, additions, builders & whole subdivisions.
See the serviceHOA, POA & municipal contracts
Service & maintenance contracts for neighborhoods of grinder pumps, STEP systems & low-pressure sewer mains.
See the serviceQuestions we get a lot
What do I do when my grinder pump alarm goes off?
Stop ALL water use in your home. Silence the alarm with the switch on the right side or the button on the bottom of the control panel. Then call 888-936-9377.
How do I silence my grinder pump alarm?
If there's a toggle on the right side of the panel, flip it from up to the middle. If there's a button on the bottom, press it. Switch missing or broken? Open the panel & turn off the small single-pole breaker. That's the alarm. Never touch the bigger dual-pole breaker. It runs your pump.
Which breaker in the panel is the alarm?
The single-pole breaker. On E-One one-pump panels it's usually 10 amp. On Delta & Liberty panels it's usually 15 amp. The bigger dual-pole breaker runs the pump. Never touch it.
Why won't the red light go off after I silence it?
The switch only silences the sound. The red light stays on until our tech fixes the problem & resets it.
Can I use water when my grinder pump alarm is on?
No. Stop ALL water use inside your home: laundry, dishwasher, baths, showers, sinks & toilets. Your tank is already full & it can back up into your home.
What causes grinder pump alarms?
Grease. Grease building up inside the grinder pump is the main cause of alarms & service calls.
What do I do if the power goes out?
If it's short, use water sparingly. If it's long, stop using water until the power comes back. The pump starts on its own when it does.
What are your hours?
Our hours are Mon-Fri 7 AM-6 PM & Sat 9 AM-4 PM. Closed Sundays. Leave a message and we'll call you back the same day, 7 AM to 6:30 PM, Monday through Friday. After-hours rates apply.
How much is a service call?
A service call is $195. Hourly troubleshooting labor is $180 an hour. Parts & bigger jobs are quoted on site, in writing, before we start.
What's going on?
Tell us what you're smelling, hearing, seeing. Your request goes straight to our scheduling board.
- Faster by phone888-936-9377
- Usually within 24 hoursWithin 24 hours is our norm, outside of Sundays.
- HoursMon–Fri 7:00am–6:00pm. Sat 9:00am–4:00pm. Closed Sundays. After-hours rates apply.
Request service online
Prefer to talk? Call 888-936-9377. If the form doesn't load, open it here.
Smell something?
Hear something?
That's our cue. Call now or request service online.
